Zs1105 diesel engine factory manufacturers

The ZS1105 is a single-cylinder, horizontal, four-stroke, water-cooled diesel engine. Buyers must verify a rated power of approximately 12.1 kW (16.5 HP) and a rated speed of 2200 rpm. Ensure the cylinder bore is 105mm and the stroke is 115mm. High-quality units should feature forced splashing lubrication and a hand-start or electric start option depending on the application.

This engine is a 'workhorse' primarily used for small-scale agricultural machinery such as walking tractors, irrigation pumps, and small harvesters. It is also widely applied in stationary power generation for rural areas and as a power source for small marine vessels or construction equipment like concrete mixers.

Suppliers should ideally hold ISO 9001 certification for quality management. For specific markets, look for CE marking (Europe) or EPA/CARB compliance (USA), though these are rare for older single-cylinder designs. Ensure the product meets GB/T 19001 standards if sourcing from China to guarantee manufacturing consistency.

Prioritize engines with evaporative or radiator cooling systems that use high-grade cast iron for the cylinder block to ensure heat dissipation. Request information on the fuel consumption rate (≤244.8 g/kWh); lower consumption often indicates better combustion efficiency and internal component precision.

The main risks include emission regulation non-compliance in the destination country and damage during transit due to the engine's weight. Always confirm that the engine meets your local environmental protection agency's emission tiers to avoid customs seizure. Additionally, ensure the supplier uses fumigated wooden crates or reinforced steel frames for packaging.

Focus on spare parts inclusion rather than just unit price; request a 'wear-parts kit' (filters, gaskets, nozzles) to be included in the bulk price. For orders exceeding 50-100 units, negotiate for OEM branding on the engine plate and a 12-18 month warranty period, which is standard for reputable export-oriented factories.

Utilize secure payment services provided by reputable platforms like Made-in-China.com, which offer trade escrow or audit services. Never pay 100% upfront; a standard 30% deposit and 70% balance against the Bill of Lading (B/L) is the industry norm. Consider hiring a third-party inspection agency (like SGS or Intertek) to perform a 'Loading Supervision' to verify the quantity and condition before the container is sealed.

Due to the high weight-to-volume ratio, Sea Freight (LCL for small batches, FCL for large orders) is the only economically feasible method. Ensure the supplier provides a Material Safety Data Sheet (MSDS), as engines are sometimes classified as 'Dangerous Goods' if they contain residual oil or batteries. Request FOB (Free On Board) terms to maintain control over your international logistics costs.